What’s the short answer?
- Regular gasoline averaged $4.071 a gallon and residential propane $2.674 a gallon in EIA's weekly readings for Aug 31 and Mar 30, 2026.
- Propane holds about 24% less energy per gallon than gasoline, so generators need roughly 31% more propane by volume for the same output.
- A typical fridge draws 150-400 running watts; a 2-ton central AC draws 2,000-2,500 running watts, per Champion's wattage chart.
- Fuel burn doesn't scale proportionally with rated wattage: Champion's 1,600W and 1,850W inverter models run about the same hours per tank.
- Mains wiring, transfer switches, and breaker hookups are a licensed electrician's job, not a fuel-cost question.
The forecast is calling for a multi-day outage, the tank on the generator is half full, and the real question isn’t whether it will run, it’s what running it will cost by the time the power comes back. Fuel prices move week to week, and the number printed on the generator’s spec sheet is a peak rating, not a bill.
The short answer: Regular gasoline averaged $4.071 a gallon (week of August 31, 2026) and residential propane $2.674 a gallon (week of March 30, 2026) in the U.S. Energy Information Administration’s weekly readings, but propane holds roughly 24% less energy per gallon than gasoline, so it takes about 31% more propane by volume to deliver the same power. Once that adjustment is made, propane still tends to cost less per hour of run time at those prices, and your actual bill depends far more on which appliances you’re running than on the wattage number printed on the generator itself.
What Actually Drives Your Generator’s Fuel Bill
Three things set the real cost of running a generator all day: the price you pay per gallon, how much energy that gallon actually holds, and how much load you’re pulling relative to the machine’s rated output. Most people only look at the first one. The second two matter just as much, and they’re the reason two generators with similar wattage ratings can burn fuel at noticeably different rates.
Gasoline, propane, and diesel are not interchangeable gallon for gallon. A gallon of gasoline contains about 120,214 Btu of energy, a gallon of diesel holds about 137,381 Btu, and a gallon of propane holds only about 91,452 Btu (U.S. Energy Information Administration, Units and calculators explained). That gap is why a straight price-per-gallon comparison between fuels is misleading on its own, and it’s the first number to write down before doing any fuel math.
Load matters too. A generator running well under its rated wattage is not working as hard as one running near its ceiling, and how much of that rated wattage you’re actually pulling shifts the math more than the sticker on the box suggests.
Sizing the Load Before You Size the Fuel Bill
Before any fuel cost means anything, you need a realistic number for what you’re actually running, because generator fuel burn tracks your load, not your generator’s rated capacity.
A typical refrigerator draws 150 to 400 running watts, with a surge of 800 to 1,200 watts when the compressor kicks on. A 2-ton central air conditioner draws 2,000 to 2,500 running watts, with a starting surge of 3,500 to 4,500 watts (Champion Power Equipment, Generator Wattage Chart). That starting-watt figure is the one that trips people up: it’s a brief spike, not the sustained draw, but a generator has to be sized to survive it or the appliance won’t start at all.
Add up the running watts of everything you plan to run at once, then check that your generator’s surge capacity covers the single largest starting-watt draw in that mix, usually the air conditioner or a well pump, layered on top of everything else already running. A furnace blower, lighting, and small electronics add to the running total, but their exact draw depends on the specific unit, so check the nameplate rating on each appliance rather than estimating.
One thing this guide will not walk you through: hardwiring a generator into your home’s electrical panel, running it through a transfer switch, or tying into existing circuits and breakers. That’s mains AC wiring work, and it belongs to a licensed electrician and your local code official, not a fuel-cost calculation. Low-voltage DC accessories, battery chargers, and anything you plug directly into the generator’s own outlets are a different matter and fall outside that restriction.
If you’d rather sidestep some of this sizing math entirely for smaller loads, a battery-based power station sidesteps fuel altogether for shorter outages, running strictly on stored charge instead of burning gas or propane hour by hour. It won’t carry a central air conditioner through a multi-day outage the way a fueled generator can, but for a fridge and lights it removes the fuel-cost question completely.
Gasoline vs Propane: The Real Cost Per Hour of Power
This is where the Btu numbers pay off. In EIA’s weekly readings, regular gasoline averaged $4.071 a gallon for the week of August 31, 2026, while residential propane averaged $2.674 a gallon as of March 30, 2026, the last weekly reading before EIA’s seasonal heating-fuel report paused for the off-season (U.S. Energy Information Administration, Aug 31, 2026; U.S. Energy Information Administration, March 30, 2026).
Looked at as a raw price per gallon, propane looks like the clear winner. But a gallon of propane only holds about 91,452 Btu against gasoline’s 120,214 Btu, a difference of roughly 24%. To get the same energy out of propane that you’d get from a gallon of gasoline, you need about 31% more propane by volume (U.S. Energy Information Administration, Units and calculators explained).
Run that adjustment through the actual prices: $2.674 per gallon of propane, multiplied by 1.31 to match a gasoline-equivalent gallon, works out to roughly $3.50. Compared against gasoline’s $4.071, propane still comes out ahead per unit of energy delivered, by around 14% at these specific prices. That’s a real advantage, but a modest one, and it’s not automatic. It shrinks or disappears entirely if your local propane price runs meaningfully above the national average, which propane prices often do depending on region and season. Pull your own local price per gallon for both fuels and run the same math before assuming the national numbers apply to your driveway.
This is also why “propane is always cheaper” doesn’t hold up as a blanket rule. Propane costs less per gallon at the pump, but it takes more gallons to do the same work, and the only way to know which fuel actually wins for you is to run the Btu adjustment against your local prices rather than comparing the sticker price alone.
Why a Bigger Generator Doesn’t Burn Proportionally More Fuel
It’s tempting to assume that a generator rated for more watts will burn fuel proportionally faster, but manufacturer run-time data doesn’t back that up. Champion’s 1,600-running-watt inverter generator is rated for about an 11-hour run time on a tank. Moving up to the 1,850-watt class stretches that run time to about 11.5 hours (Champion Power Equipment, Portable Inverter Generators). A generator rated for close to 16% more power did not burn fuel 16% faster; it ran essentially just as long per tank.
Tank size, engine efficiency, and how much of that rated wattage you’re actually using at any given moment all affect fuel burn as much as the number printed on the box. A generator running at a smaller fraction of its rated capacity generally uses less fuel per hour than one working near its limit, though the exact savings depend on the specific engine and how it’s loaded, so this is a reason to size your load carefully rather than to assume a bigger unit automatically costs more to run.
The practical takeaway: don’t pick a generator size by fuel-cost math alone, and don’t assume the biggest unit on the shelf is the most expensive to operate. Size it to your actual starting-watt needs first, then compare run-time-per-tank figures across models in the wattage range that actually covers your load.
One Full Tank on a 7,000-Watt Generator
A run-time number is only useful when it comes with a tank size and a stated load. Champion’s 7,000-running-watt gasoline portable generator (model 201073, 8,750 starting watts) lists all three. Its spec sheet gives a 7.7-gallon fuel tank and a gasoline run time of 11 hours at 1/2 load (Champion Power Equipment). The product description phrases it as up to 11 hours at 50% load when the tank is full.
Read together, one fill of 7.7 gallons covers up to 11 hours with the generator carrying half of its load. The page lists a run time at half load only and gives no figures for other loads, so the 11 hours applies to that load and should not be stretched to a heavier or lighter draw. The same listing shows a 389cc four-stroke engine.
Hours per tank at a stated load, plus the tank size behind that figure, are the two numbers to carry into the estimate below.
Building Your Own Multi-Day Outage Cost Estimate
There’s no single dollar figure that applies to “running a generator during an outage,” because it depends entirely on your load and your fuel choice. Here’s the framework to run the numbers yourself instead of guessing:
- Add up your running watts. List every appliance you’ll run simultaneously and total their running-watt figures from each nameplate, then confirm your generator’s surge rating covers the largest single starting-watt draw in that mix on top of everything else.
- Find your generator’s rated run time per tank. This is in your owner’s manual, typically listed at a specific load percentage, since run time shortens as load increases.
- Price your fuel locally. Check current gasoline and propane prices in your area rather than relying on national averages, since propane in particular varies by region.
- Adjust for Btu content if comparing fuels. Multiply a propane price per gallon by roughly 1.31 to get a gasoline-equivalent comparison figure, using the same math walked through above.
- Multiply refills by price. Once you know roughly how many tank refills a given outage length requires at your load, multiply that by your local price per gallon and per-tank capacity to land on a real estimate for your situation.
This is more work than reading a single number off a chart, but it’s the only way the estimate actually reflects your appliances, your generator, and your local fuel prices instead of a generic average that may not apply.
For a deeper look at whether a fueled generator is even the right tool for your situation versus a solar-charged battery system, our breakdown of 300W vs 1000W solar generators walks through what each size can actually carry. And before running any generator, fueled or otherwise, indoors or near the house, review the clearance rules for carbon monoxide safety; that’s not a cost question, it’s a life-safety one, and it comes before any fuel math.
Once you’ve sized your load and picked a fuel, the next step is simple: pull your own local gas and propane prices, run them through the Btu adjustment above, and write down what a full day of your actual appliance mix costs at each fuel option before the next outage forecast shows up.
Frequently Asked Questions
- Is propane actually cheaper than gasoline for running a generator?
- Residential propane averaged $2.674 a gallon (week of March 30, 2026) versus $4.071 for regular gasoline (week of August 31, 2026) in EIA's weekly readings, but propane carries about 24% less energy per gallon, so it takes roughly 31% more propane by volume to match a gallon of gasoline's output. After that adjustment, propane still comes out cheaper per unit of energy at these prices, though the margin narrows if local propane costs run above the national average.
- How many gallons of gas does a generator burn per hour running my whole house?
- There's no single number for this: burn rate depends on your generator's engine and how much load you're actually pulling, not a fixed per-house rate. Check your owner's manual for gallons-per-hour figures at 50% and 100% load, then multiply by your local fuel price to estimate your own cost.
- Does a bigger generator burn proportionally more fuel?
- Not necessarily. Champion's data shows its 1,600-running-watt inverter generator runs about 11 hours per tank, while an 1,850-watt model in the same line stretches to about 11.5 hours, showing that tank size, engine efficiency and load percentage affect fuel burn as much as the rated wattage on the box.
- What size generator do I need for my fridge and air conditioner?
- A typical refrigerator draws 150 to 400 running watts, with a surge of 800 to 1,200 watts on startup, while a 2-ton central air conditioner draws 2,000 to 2,500 running watts and 3,500 to 4,500 watts to start. Add your specific appliances' nameplate ratings together and size your generator to cover the highest simultaneous starting-watt total, not just the running total.
Sources & references
- U.S. Energy Information Administration, Gasoline and Diesel Fuel Update (opens in new tab)
- U.S. Energy Information Administration, Heating Oil and Propane Update (opens in new tab)
- U.S. Energy Information Administration, Units and calculators explained (opens in new tab)
- Champion Power Equipment, Generator Wattage Chart (opens in new tab)
- Champion Power Equipment, Portable Inverter Generators (opens in new tab)
- Champion Power Equipment, 7000W Generator with CO Shield 201073 (opens in new tab)
Before you go
The Renter's Homestead Pack
Self-reliance projects for the yard you don't own — container yields, a raised bed built to move with you, balcony preservation basics, and the landlord questions to ask first.
Free guide
The Renter's Homestead Pack
Self-reliance projects for the yard you don't own — container yields, a raised bed built to move with you, balcony preservation basics, and the landlord questions to ask first.